Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
CRESTRON
AMP-X300
The Crestron AMP-X300 is an X-Series 4-channel power amplifier for meeting and conference room audio.
It delivers 75W per channel across four channels, bridges to 150W (2- or 3-channel) and up to 300W single-bridged, and switches per output between Lo-Z for 4Ω/8Ω speakers and Hi-Z for 70V/100V distributed systems. Performance is rated 20 Hz – 20 kHz ±0.5 dB with S/N >103 dBA, fed by four RCA and four balanced line inputs. It is half-rack 1RU and convection-cooled (fanless).
AVSTEK matches the amplifier to the room's loudspeakers, sets Lo-Z or Hi-Z mode and bridging per zone, and wires remote standby into the control system so the amp powers down with the room.
The Crestron AMP-X300 is an X-Series 4-channel power amplifier for meeting and conference room audio.
It delivers 75W per channel across four channels, bridges to 150W (2- or 3-channel) and up to 300W single-bridged, and switches per output between Lo-Z for 4Ω/8Ω speakers and Hi-Z for 70V/100V distributed systems. Performance is rated 20 Hz – 20 kHz ±0.5 dB with S/N >103 dBA, fed by four RCA and four balanced line inputs. It is half-rack 1RU and convection-cooled (fanless).
AVSTEK matches the amplifier to the room's loudspeakers, sets Lo-Z or Hi-Z mode and bridging per zone, and wires remote standby into the control system so the amp powers down with the room.
1RU surface or rack-mountable power amplifier
Half-rack width form factor, gangable with other next generation half-rack width form factor products using the RMK-AMP-X mounting kit (sold separately)
Configurable for either LoZ (4/8 Ω) or Hi-Z (70V or 100V) operation
Configurable for 4 x up to 75 W output, 2 x up to 150 W output, 1 x up to 300 W (bridged) output, and 2 x up to 75 W + 1 x up to 150 W(bridged) output
Low noise, low distortion, and high headroom
Comprehensive fault and speaker protection
Captive speaker connectors for secure and robust connectivity
Balanced and unbalanced inputs
Standby feature instantly turns on amplifier when input sensing circuitry detects an audio signal
Always On feature allows constant on connection with very low power consumption
Remote standby feature allows for instant on/off control over amplifier outputs via a simple contact closure input
Front panel power/standby, fault, and signal/clip indicators
Internal universal 100-240V power supply